K2382-5 Ranger 250 GXT Stainless Steel Case (Kohler) (w/ Electric Fuel Pump)






Get all of the XTras needed for construction and maintenance work. That’s XTra welding performance with 250 amps for AC or DC stick and DC wire welding and XTra power with up to 11,000 watts peak for lights, grinders or high amperage equipment. You also get XTra protection and quiet operation with the Lincoln enclosed case.

  • Totally Enclosed Case
    • Engine is fully protected.
    • 3 service access doors.
    • Low Noise – 76.4 dBA sound level at 23 ft. (7 m). 100.7 dB sound power (Lwa) at rated output.
    • Choose from painted, camo wrapped, or stainless steel roof, case sides and engine doors.
  • Versatile AC/DC Welding
    • AC/DC welding output for a broad range of stick electrode types.
    • Excellent AC TIG welding with optional TIG Module and either a foot or hand Amptrol™ for aluminum and other alloy welding.
    • MIG and Flux-Cored capable (with optional equipment).
    • Remote ready! 6-pin connector and local/remote switch for remote control operation.
  • 11,000 Watts Peak Single-Phase AC Generator Power
    • Peak for motor starting.
    • 10,000 watts continuous power for generator, plasma cutter or inverter welder.
    • Lights, grinder, power tools.
  • 23 HP Kohler® Gasoline Engine
    • 2 cylinder, 4 cycle overhead valve air-cooled design.
    • Electric fuel pump avoids vapor lock.
    • Oil drain extension for easy oil changes.
    • 12 gallon tank for extended run times.
    • Electric fuel gauge located on control panel makes it easy to check the fuel level during operation and refueling.
  • Rugged Reliability
    • Welding and AC Generator Outputs Rated at 104°F (40°C).




    • Totally Enclosed Case
    • Versatile AC/DC Welding
    • 11,000 Watts Peak Single-Phase AC Generator Power
    • 23 HP Kohler Gasoline Engine
    • Rugged Reliability


    Warning –

    Cancer and Reproductive Harm –


    What’s Included

    • Machine Only


    Product Weights & Dimensions

    Dimensions (H x W x D)30 in x 21.5 in x 42.3 in (762 mm x 546 mm x 1073 mm)
    Net Weight602 lbs (273 kg)


    Machines ProcessesStick (SMAW)
    TIG (GTAW)
    MIG (GMAW)
    Flux-Cored Self-Shielded (FCAW-S)
    Flux-Cored Gas-Shielded (FCAW-G)
    Max Rating250A / 25V /100% @ 104°F (40°C)
    Output Range by ModeCC-Stick: 50 – 250 Amps, CV-Wire: 14 – 28 Volts

    Engine Driven Welders

    Single Phase Auxiliary Output10,000 Watts Continuous, 120/240V
    Auxiliary Output Frequency60 Hz
    Receptacle TypesNEMA 5-20R
    NEMA 14-50R
    Engine Brand & ModelKohler OHV Command CH730
    Engine Description2 Cylinder Air-Cooled Gasoline Engine
    Engine Horsepower23 HP
    High Idle Operating Speed @ Rated Output3600
    Fuel Tank Size (US gal.)12
    Fuel Tank Size (L)45.4
    Oil Capacity (qts.)2.0
    Oil Capacity (L)1.9


    Typical ApplicationConstruction
    Construction & Field Erection
    General Fabrication
    Heavy Fabrication
    Maintenance & Repair
    Structural Fabrication
    Structural Welding


    Warranty3 Years Parts and Labor – Engine warranted separately by engine manufacturer