K2807-1 Tomahawk 625 Plasma Cutter with 20 ft Hand Torch



The Tomahawk 625 Plasma Cutter is portable for plasma cutting and gouging on a wide variety of materials including mild steel, stainless steel, aluminum, brass, and copper.


Plasma Cutting – Anywhere, Anytime

Tomahawk 625 plasma cutting systems are portable enough to carry to any jobsite. Hook up the compressed air, grab the torch and start cutting right away

  • Lightweight and Portable – Easily carried by one person.
  • Continuous Output Control – Focus the arc for different material thickness.
  • Touch Start System – Reliable plasma arc initiation without high frequency.
  • Rapid Arc Restrike – Fast cutting through gaps, even expanded metal.
  • Front Panel Purge Control – Makes it easy to set the air flow rate without initiating the plasma arc.
  • Cool Operation, Long Consumable Life – New electrode and nozzle design helps you save money in the long run.
  • Added Safety – Our Parts-in-Place system detects correct installation of consumables and torch.
  • Engine Drive Compatible – Select a Lincoln Electric Ranger® or Vantage® to power your Tomahawk® in remote locations
  • Optional Machine Plasma Torch available for use on CNC plasma cutting tables.


What’s Included

  • LC40 hand torch and 20 ft. (6 m) cable with electrode | nozzle 40A | swirl ring | retaining cap (standard) | drag spacer
  • Air regulator and pressure gauge
  • Internal water separator
  • Work clamp and cable
  • Spare consumables include (2) electrodes | (2) nozzles 40A | (1) swirl ring
  • Shoulder strap
  • Input power cord



Warning –

Cancer and Reproductive Harm –



Machine Inputs & Outputs

Phase 1: Input Voltage #1 (Voltage/Phase/Hertz)208/230/1/50/60
Phase 1: Rated Output #1A (Current/Voltage/Duty Cycle)24A/89.6V/100%
Phase 1: Rated Output #1B (Current/Voltage/Duty Cycle)29A/91.8V/60%
Phase 1: Rated Output #1C (Current/Voltage/Duty Cycle)40A/91.8V/35%
Phase 1: Input Current at Max Rated Ouput #1 (Current)36.8A

Product Weights & Dimensions

Dimensions (H x W x D)15.2 in x 8.5 in x 18.9 in (385 mm x 215 mm x 480 mm)
Net Weight34 lbs (15.42 kg)


Machines ProcessesPlasma Gouging
Plasma Cutting
Max Rating40A

Plasma Machines

Torch IncludedYes
Gas SupplyAir or Nitrogen
Gas Pressure Required80 – 110 psi (6 -7.5 Bar)
Recommended Cutting Capacity ( Mild Steel) ( In/ft)1/2 in @ 20 ipm
Recommended Cutting Capacity ( Mild Steel) (mm/M)12.7 mm. @ .51 m/min
Maximum Cutting Thickness ( Mild Steel) ( In/Ft)5/8 in @ 12 ipm
Maximum Cutting Thickness ( Mild Steel) (mm/M)15.9 mm. @ .30 m/min
Maximum Severance ( Mild Steel) ( In/Ft)3/4 in @ 5 ipm
Maximum Severance ( Mild Steel) (mm/M)19.1 mm. @ .13 m/min

Basic Specification

Output Range10-40A


Typical ApplicationConstruction
General Fabrication
Marine Fabrication & Repair
Structural Fabrication


Warranty3 Year on Machine, 1 Year on Torch ( Two Year Extended Warranty available in the U.S.A. and Canada)